20xx委托加工合同范本(1800字)

来源:m.fanwen118.com时间:2021.3.3

2015委托加工合同范本

委托加工合同范本由第一公文网整理,被委托方与加工方就加工要求,加工内容等事项达成委托协议。下面是小编为大家带来的委托加工合同范本

委托加工合同范本

委托方:___________(以下简称甲方)被委托方:_________(以下简称乙方)

甲方委托乙方加工__________________产品,为维护甲乙双方的利益,经双方协商,就有关代加工事宜达成如下协议,以供双方共同遵守。

第一条代加工内容

甲方委托乙方为其加工系列产品,加工数量、款式(或开发信息)、标准、质量要求由甲方提供,价格由双方协商确定,另在订单上详述。

第二条甲方责任

1.按计划分季度委托乙方为其加工甲方______产品。

2.向乙方提供甲方生产授权委托手续、商标注册证、授权书以及对商业秘密的专有合法证明等相关法律文件

3.向乙方提供加工品款式(或开发信息)、数量、技术要求、交货时间等。

4.负责向乙方提供甲方商标各种组合、内外包装及其按计划分季度委托乙方为其加工甲方____________产品。

2.向乙方提供甲方生产授权委托手续、商标注册证、授权书以及对商业秘密的专有合法证明等相关法律文件

3.向乙方提供加工品款式(或开发信息)、数量、技术要求、交货时间等。

4.负责向乙方提供甲方商标各种组合、内外包装及其它标有商标的包装及印刷品等与乙方加工品有关的内容。

5.甲方有权对乙方的生产标准、产品质量进行检查监督,并提出意见和建议,确认的样品验收货品。

6.甲方按照甲乙双方确定的样板和标准进行验收货品。

7.甲乙双方严守商业秘密。

·本合同所签订的上述加工品的商标及图案文字为甲方所有,乙方不得为他人生产或提供。

·甲方不得交乙方设计生产的样版提供给其他生产商。

第三条乙方责任

1.严格按照甲方的委托内容及要求从事代加工活动。

2.甲方确定的款式、数量、质量及生产期限等标准打版进行生产,生产标准符合____________质量要求,不得以任何形式和理由超过订单数量和品种。

3.负责原材料的采购、验收、供应,并按照甲方确定的原材料质量要求进行。

4.严格管理甲方提供的商标、包装及印刷品,因乙方管理不善,造成甲方商标、饰品及包装等丢失,应承担相应法律责任。

5.不得将甲方提供的款式用于其他商标生产。

6.严守甲方的商业秘密。

7.对生产的产品实行三包,三包标准按国家有关规定执行。

第四条付款方式及交货地点

甲方确定委托加工款式、数量、标准后,/fanwen/1578/与乙方签订委托加工通知单,并于签订之日起一星期内乙方支付总货款的____________作为预付款,乙方提供的货品经甲方验收进仓后财务核实即付款,交货地点为甲方库房。

第五条验收标准

双方在下订单之前确定生产品种样品,甲、乙双方以此及在生产过程中,质量主管之监督要求(以书面内容要求为准)作为验收标准。甲方在乙方送货到指定地点之日起3日内必须对产品进行验收。第六条违约责任

1.因乙方未按甲方要求的时间交货,乙方应每天承担此批货总价______%的违约金;如甲方没按合同要求提货,乙方有权扣除甲方订金。

2.如乙方擅自生产或销售甲方产品及包装、印刷品等,一经查证,无论数量多少乙方应付甲方人民币______万元违约金,并追究乙方法律责任。

3.凡违反本合同之其他各项条款的,责任方应承担此批货价值______%的违约金。

4.甲、乙双方如有一方违约,除追究违约责任外,另一方有权终止本合同。因甲方提供的商标及授权手续不完备或虚假产生的法律责任由甲方承担,甲方赔偿因此给乙方带来和经济损失。

第七条合同有效期限

本委托加工合同期限为______个月,自______年______月______日至______年______月______日止,生产期限以甲方计划通知单确定为准。

第八条合同如遇争议,甲乙双方可协商解决,达不成协议的可向广州仲裁委员会申请仲裁。

第九条本合同正本一式二份,经双方当地人代表签字盖章后生效。

第十条其他未尽事宜另行订立。

甲方:____________乙方:____________

代表人:__________代表人:_________

日期:____________日期:____________

以上这委托加工合同范本。就为您介绍到这里,希望它对您有帮助。如果您喜欢这篇文章,请分享给您的好友。更多合同尽在:合同协议望大家多支持本网站,谢谢


第二篇:委托加工合同范本_OEM合同(上) 16000字

委托加工合同范本_OEM合同(上)

委 托 方:____________________________________

地 址:____________ 邮码:____________ 电话:____________

法定代表人:____________ 职务:____________

定 做 方:____________________________________

地 址:____________ 邮码:____________ 电话:____________

法定代表人:____________ 职务:____________

定做方委托委托方加工____________,经双方充分协商,特订立本合同,以便共同遵守。

第一条 加工成品

编号

名称

规格

单位

数量

备注

Commission processing contract template _OEM contract (on)

Principal :____________________________________

Address :____________ Postal Code :____________ Phone :____________

The legal representative of the :____________ duties :____________

Custom side :____________________________________

Address :____________ Postal Code :____________ Phone :____________

The legal representative of the :____________ duties :____________

Commissioned by the commissioning party custom party processing ____________, full consultation by both parties, special to make this contract in order to abide by.

The first finished products

Number

Name

Specification

Unit

Quantity

Remarks

第二条 加工成品质量要求

第三条 原材料的提供办法及规格、数量、质量

The second quality finished products

Article provided by way of raw materials and specifications, quantity, quality

1.(用委托方原料完成工作的),委托方必须依照合同规定选用原材料,并接受定做方检验。委托方隐瞒原材料的缺陷或者用不符合合同规定的原材料而影响定做质量时,定做方有权要求重作、修理、减少价款或退货。(质量保证的问题)

1 (Principal raw materials used to complete the work), the client must use raw materials in accordance with the provisions of the contract, and accept custom-square test. The commissioning party to conceal material defects or nonconforming use of raw materials affect the quality of custom, the custom-made party the right to request to redo, repair, reduce the price or return. (Quality assurance issues)

2.(用定做方原材料完成工作的,应当明确规定原材料的消耗定额)。定做方应按合同规定的时间、数量、质量、规格提供原材料,委托方对定做方提供的原材料要按合同规定及时检验,不符合要求的,应立即通知定做方调换或补齐。委托方对定做方提供的原材料不得擅自更换,对修理的物品不得偷换零部件。

2 (square of raw materials with custom work done, it should be clear that the consumption of raw materials, fixed). Custom party should be stipulated in the contract time, quantity, quality, specifications of raw materials, the commissioning party provided the raw material for custom-made according to the contract and timely inspection, does not meet the requirements, custom-made party shall immediately notify the exchange or padded.

Principal of the raw materials provided by custom are not allowed to replace, repair items are not allowed for substitution of parts.

3.交(提)原材料等物品日期计算,参照第七条规定执行。

第四条 技术资料、图纸提供办法

3 cross (to mention) the date of the calculation of raw materials and other items, refer to Article VII implementation.

Article technical information, drawings supplied by way

1.委托方在依照定做方的要求进行工作期间,发现提供的图纸或技术要求不合理,应当及时通知定做方;定做方应当在规定的时间内回复,提出修改意见。委托方在规定的时间内未得到答复,有权停止工作,并及时通知定做方,因此造成的损失,由定做方赔偿。

2.委托方对于委托的工作,如果定做方要求保密,应当严格遵守,未经定做方许可不得留存技术资料的复制品。

3.定做方应当按规定日期提供技术资料、图纸等。

1 Principal parties in accordance with the requirements of custom work, found the

drawings or technical demands are unreasonable, it shall promptly notify the custom side; custom party shall reply within the prescribed time, propose amendments. Principal within

the prescribed time has not been answered, the right to stop work and notify the custom side, the resulting loss, damages by the custom side.

2 Principal for commissioned work, custom side if requested confidentiality, should be strictly adhered to, permission shall not be retained without the custom side of copies of technical information.

3 custom-made party date should be required to provide technical information, drawings and so on.

第五条 价款或酬金

价款或酬金,按照国家或主管部门的规定执行,没有规定的由当事人双方商定。

第六条 验收标准和方法

1.按照合同规定的质量要求、图纸和样品作为验收标准。

2.定做方应当按合同规定的期限验收委托方所完成的工作。验收前委托方应当向定做方提交必需的技术资料和有关质量证明。对短期检验难以发现质量缺陷的定做物或项目,应当由双方协商,在合同中规定保证期限。保证期限内发生问题,除定做方使用、保管不当等原因而造成质量问题的以外,由委托方负责修复或退换。

3.当事人双方对委托的定做物和项目质量在检验中发生争议时,可由法定质量监督检验机构提供检验证明。

Article price or remuneration

Price or remuneration, in accordance with national regulations or the competent department, does not require the two sides agreed to by the parties.

Article acceptance criteria and methods

1 according to the contract quality requirements, drawings and samples as acceptance criteria.

2 custom-made party shall limit stipulated in the contract acceptance of the work done by the commissioning party. Acceptance before the commissioning party shall be required to

submit a custom technical information and evidence about the quality. Difficult to find

quality short-term test for defects in materials or items made to order, should be by mutual agreement, the provisions in the contract guarantee period. Problem within the warranty period, in addition to custom-made party to use, improper storage and other quality problems caused by reasons other than by the commissioning party is responsible for repair or exchange.

3. Both parties to the commission of custom objects and project quality in the event of a dispute inspection, quality supervision and inspection by the statutory body to provide inspection certificate

第七条 交货的时间和地点

1.交(提)定做物期限应当按照合同规定履行。任何一方要求提前或延期交(提)定做物,应当在事先与对方达成协议,并按协议执行。

2.交(提)定做物日期计算:委托方自备运输工具送交定做物的以定做方接收的戳记日期为准;委托运输部门运输的,以发运定做物时承运部门签发戳记日期为准;自提定做物的,以委托方通知的提取日期为准,但委托方在发出提取定做物通知中,必须留给定做方以必要的途中时间;双方另有约定的,按约定的方法计算。

Article delivery time and location

1 pay (mentioned) should be made to order things according to the contract performance period. Any party required to pay in advance or postpone (put) custom objects, should be agreed in advance with each other, according to protocol implementation.

2 cross (to mention) the date of calculation of custom objects: self-transport sent to the commissioning party custom objects to customize the stamp date of the reception;

commissioned by the transport sector transport, custom shipping materials to be issued when the carrier sector stamp date of; from mentioning custom objects to the

commissioning party to inform the date of extraction, but the commissioning party in a notice issued by extracting custom objects, custom side must be left on the way to the necessary time; otherwise agreed , according to the agreed method.

第八条 包装要求及费用负担

第九条 运输办法及费用负担

第十条 结算方式及期限

第十一条 其他约定

第十二条 委托方的违约责任

一、 未按合同规定的质量交付定做物或完成工作,定做方同意利用的,应当按质论价,

酌减酬金或价款;不同意利用的,应当负责修整或调换,并承担逾期交付的责任;经过修整或调换后,仍不符合合同规定的,定做方有权拒收,由此造成的损失由委托方赔偿。 Article packaging requirements and the cost burden

Article IX transportation methods and cost burden

Article settlement and duration of

Article XI of other conventions

Article XII of the commissioning party's breach of contract

First, the contract fails to deliver customized materials or the quality of work done, custom party agreed to use, it should be according to quality, reduce it remuneration or price; do not agree with the use of, and shall be responsible for repair or

replacement, and take delivery of overdue responsibility; trimmed or exchange, the still not meet the contract requirements, custom party the right to reject, the resulting loss of compensation by the commissioning party.

二、交付定做物或完成工作的数量少于合同规定,定做方仍然需要的,应当照数补齐,补交部分按逾期交付处理;少交、迟交部分定做方不再需要的,委托方应赔偿定做方因此造成的损失。

三、未按合同规包装定做物,需返修或重新包装的,应当负责返修或重新包装,并承担因此而支付的费用。定做方不要求返修或重新包装而要求赔偿损失的,委托方应当偿付定做方该

不合格包装物低于合格包装物的价值部分。因包装不符合同规定造成定做物毁损、灭失的,由委托方赔偿损失。

Second, the delivery of custom objects, or less than the number of work done under the contract, custom side are still needed and should be filled according to the number, pay part of the deal by late delivery; pay less, late part of the custom side is no longer needed , the commission shall compensate the resulting loss of custom-made side.

Third, the failure to regulate the contract custom packaging materials required to repair or re-packaging, shall be responsible for repairing or re-packaging, and thus bear the fees paid. Custom party does not require repair or re-packaging for damages, the

commissioning party shall fail to pay custom packaging side of the lower part of the value of qualified packaging. Inconsistent with the contract caused by custom packaging material is damaged or lost, by the commissioning party for damages.

四、逾期交付定做物(包括返修、更换、补交等),应当向定做方偿付违约金____ 元;(合同中无具体规定的,应当比照中国人民银行有关延期付款的规定,按逾期交付部分的价款总额计算,向定做方偿付违约金)以酬金计算的,每逾期一天,按逾期交付部分的酬金总额的千分之一偿付违约金。

未经定做方同意,提前交付定做物,定做方有权拒收。

Fourth, the late delivery of custom objects (including repair, replacement, pay, etc.) should be made to order parties to pay liquidated damages of $ ____; (no specific provisions in the contract, the People's Bank of China shall be mutatis mutandis the provisions of the deferred payment, by late delivery of part of the total price calculation, custom-made party to pay liquidated damages) to remuneration calculated for each overdue day, according to the late delivery of one-thousandth part of the remuneration of the total pay liquidated damages.

Custom party without consent, early delivery of custom objects, custom party the right to reject.

五、不能交付定做物或不能完成工作的,应当偿付不能交付定做物或不能完成工作部分价款总值的____%(10%~30%)或酬金总额的____%(20%~60%)的违约金。

六、异地交付的定做物不符合合同规定,暂由定做方代保管时,应当偿付定做方实际支付的保管、保养费。

七、实行代运或送货的定做物,错发到达地点或接收单位(人),除按合同规定负责运到指定地点或接收单位(人)外,并承担因此多付的运杂费和逾期交付定做物的责任。

Fifth, not matter or can not complete delivery of custom work, custom-made objects

should be paid can not be delivered or can not complete the work part of the price value of ____%( 10% to 30%) or 20% of total remuneration ____%( ~ 60%) of liquidated damages. Six off-site delivery of custom-made materials do not meet contract, temporary custody by the custom side on behalf of, the parties shall be paid the actual payment of custom-made storage, maintenance.

Seven, the implementation of transportation of or delivery of custom-made materials, made to reach the wrong place or receive units (people), in addition to the contract is responsible to the designated place or receive units (people) outside, and take so much and pay transport fees responsibility for late delivery of custom objects.

八、由于保管不善致使定做方提供的原材料、设备、包装物及其他物品毁损、灭失的,应当偿付定做方因此造成的损失。

九、未按合同规定的办法和期限对定做方提供的原材料进行检验,或经检验发现原材料不符合要求而未按合同规定的期限通知定做方调换、补齐的,由委托方对工作质量、数量承担责任。

十、擅自调换定做方提供的原材料或修理物的零部件,定做方有权拒收,委托方应赔偿定做方因此造成的损失。如定做方要求重作或重新修理,应当按定做方要求办理,并承担逾期交付的责任。

Eight, the resulting lack of good care provided by custom-made raw materials, equipment, packaging and other items damaged or lost, should be made to order parties to pay the resulting losses.

Nine, failure methods and duration of the contract provided for custom inspection of raw materials or raw materials not found by the inspection fails to meet the requirements

stipulated in the contract notice period exchange custom-made side, padded, the work by the commissioning party quality, quantity take responsibility.

Ten, without exchange of raw materials provided by custom or repair material parts, custom side the right to reject, the commission shall compensate the resulting loss of custom-made side. Such as custom's request to redo or re-repair, it should be handled according to custom's request, and assume responsibility for late delivery.

第十三条 定做方的违约责任

一、中途变更定做物的数量、规格、质量或设计等,应当赔偿委托方因此造成的损失。

二、中途废止合同,属委托方提供原村料的,偿付委托方的未履行部分价款总值的

____%(10%~30%幅度)的违约金;不属委托方提供原材料的,偿付委托方以未履行部分酬金总额的____%(20%~60%的幅度)违约金。

Article XIII of custom-made party liability for breach of

A way to change the number of custom objects, specifications, quality or design, the commissioning party shall compensate the resulting losses.

Second, the half-way annulling a contract, provided the original village is commissioned material, to pay the Principal's failure to fulfill part of the price value of ____%( rate of 10% to 30%) of liquidated damages; do not belong to the commissioning party to provide raw materials, pay commission side to the unperformed portion of the total remuneration ____%( 20% to 60% of the amplitude) of liquidated damages

二、 未按合同规定的时间和要求向委托方提供原材料、技术资料、包装物等或未完成必

要的辅助工作和准备工作,委托方有权解除合同,定做方应当赔偿委托方因此而造成的损失;委托方不要求解除合同的,除交付定做物的日期得以顺延外,定做方应当偿付委托方停工待料的损失。

Third, the failure time and requirements stipulated in the contract provided to the

commissioning of raw materials, technical data, packaging and other auxiliary work or to complete the necessary work and preparation, the commissioning party the right to terminate the contract, custom party shall indemnify the commissioning party the resultant loss; the commissioning party does not require termination of the contract, other than the delivery date be postponed custom objects, the custom-made party shall pay the Principal downtime to be expected losses

三、 超过合同规定期限领取定做物的,除按本条第五款规定偿付违约金外,还应当承担

委托方实际支付的保管、保养费。定做方超过领取期限6个月不领取定做物的,委托方有权将定做物变卖,所得价款在扣除报酬、保管、保养费后,退还给定做方;变卖定做物所得少于报酬、保管、保养费时,定做方还应补偿不足部分;如定做物不能变卖,应当赔偿委托方的损失。

Fourth, over the contract period to receive custom-made objects, in addition to pay liquidated damages provision in paragraph 5, should also undertake to pay the

commission, the actual custody, maintenance costs. Custom-made party to receive more than six months duration do not receive custom objects, custom objects

entrusted party is entitled to sell, proceeds from the net pay, storage, maintenance fee, returned to the custom side; sell custom-made from less material in compensation, custody, maintenance and time-consuming, custom-made side should also

compensate for lack of parts; such as custom objects can not be sold, the

commissioning party should compensate the losses.

五、超过合同规定日期付款,应当比照中国人民银行有关延期付款的规定向委托方偿付违约金;以酬金计算的,每逾期一天,按酬金总额的千分之一偿付违约金。

六、无故拒绝接收定做物,应当赔偿委托方因此造成的损失及运输部门的罚款。

七、变更交付定做物地点或接收单位(人),承担因此而多支出的费用。

Fifth, more than the contract payment date, People's Bank of China shall be mutatis mutandis the provisions of the deferred payment to pay liquidated damages to the

commissioning party; to remuneration calculated for each overdue day, according to one thousandth of the total remuneration to pay liquidated damages.

Sixth, for no reason refuse to accept custom-made objects, the commissioning party shall compensate the resulting loss of fine and transport sectors.

Seven, custom-made material changes to the delivery location or the receiving unit (person), so take the extra expenses

第十四条 不可抗力

在合同规定的履行期限内,由于不可抗力致使定做物或原材料毁损、灭失的,委托方在取得合法证明后,可免予承担违约责任,在定做方迟延接受或无故拒收期间发生的,定做方应当承担责任,并赔偿委托方由此造成的损失。

Article XIV Force Majeure

Stipulated in the contract performance period, due to force majeure custom objects or materials damaged or lost, the client in obtaining legal proof, may be exempt from any penalty, delay in the custom side to accept or reject without cause during the, custom party should bear the responsibility, and compensate the resulting loss of the

commissioning party.

第十五条 纠纷的处理

加工委托合同发生纠纷时,当事人双方应协商解决;协商不成按( )项处理:

1.向仲裁机关申请仲裁;

2.向人民法院起诉。

本合同自____ 年____ 月____ 日起生效,合同履行完毕即失效,本合同执行期间,双方不得随意变更和解除合同,合同如有未尽事宜,由双方共同协商,作出补充规定,补充规定与本合同具有同等效力。

本合同正本一式二份,定做方和委托方各执一份;合同副本一式____份,交____________(如经鉴证或公证,则应送鉴证机关或公证机关)各留存一份。

Article XV dispute handling

Commission processing contract disputes, the parties should be settled through consultation; consultation fails by () of treatment:

1 to the arbitration body for arbitration;

2. To the people's court.

This contract ____ day ____ year ____ month with effect from completion of the failure to fulfill the contract, during the execution of this contract, both parties are not free to change and cancel the contract, the contract if not entirely, by mutual agreement, to make

supplementary provisions, supplementary Provisions of this contract has the same effect.

A duplicate original of this contract, custom side and armed with a commissioning party; copy of the contract type ____ copies, such as by cross ____________( identification or notarized, should be sent to forensic authority or notary public) of the retirement of copies. 定做方:________________________ 委托方:________________________ 代表人:________ 代表人:________

____年____月____日 ____年____月____日

Custom party :_____________________ Principal :________________________ Representative :________ Representative :________

____ Month ____ day ____ year ____ Month ____ day ____ year

更多类似范文
┣ 委托加工协议 800字
┣ 委托加工生产协议书 2200字
┣ 委托加工协议 2400字
┣ 食品委托加工协议书 2000字
┣ 更多委托加工合同范本
┗ 搜索类似范文